Questions and answers concerning the appliance
PROBLEM
CAUSE
SOLUTION
Smoke comes out of the
baking compartment or
the vents.
The ingredients stuck to the
baking compartment or to the
outside of the baking tin.
Unplug the appliance and clean the outside of the baking tin or
the baking compartment.
The ingredients are not
mixed or the bread is
not baked properly.
Incorrect program setting.
Check the selected menu and other settings.
The
start/stop
button was
pressed while the machine
was working.
Do not use the ingredients and start the whole process again.
The lid opened several times
while the machine was
working.
The lid can only be opened if the time left on the display is more
than 1:30 (this concerns only programs 1,2,3,4)
Make sure the lid was closed properly.
Long blackout while the
machine was working.
Do not use the ingredients and start the whole process again.
The rotation of the kneading
pegs is blocked.
Check if the kneading pegs are not blocked by for example
grains, etc. Pull out the baking tin and check if the drivers turn.
If this is not the case, return the appliance to a service point.
The bread goes down in
the middle and is moist
on the bottom.
The bread was left for too long
in the baking tin after baking
and warming.
Take the bread out off the baking tin before the end of the
warming function.
It is difficult to take the
bread out of the baking
tin.
The bottom of the total is
stuck to the kneading peg.
Clean the kneading peg and shaft before the next time you
bake bread. If necessary, fill the container with warm water and
leave for 30 minutes. This way the kneading pegs can be easily
removed and cleaned.
The appliance does not
start. The audible signal
goes off. The display
shows the symbol E 01.
The appliance is still hot after
the previous baking process.
Press and hold the
start/stop
button until the normal program
code appears on the display. Unplug the appliance. Take out the
baking tin and leave to cool at room temperature. Plug in and
restart the appliance.
The display shows the
symbol “EEE”.
Program or electronic error.
Start the test run. Press and hold the
menu
button, unplug
the appliance and then plug it in again. Release the button.
The appliance will perform a test run. Unplug the appliance again.
The normal program code should appear on the display. If this is
not the case, return the appliance to a service point.
Classic recipes
Ready-made bread mixtures available
in shops can be especially used in the
appliance.
WHITE BREAD
(bread weight approx. 900 g)
BUTTERMILK BREAD
(bread weight approx. 900 g)
Ingredients
Water or milk
Salt
Sugar
Flour type 500
Dry yeast
425 ml
1½ teaspoon
1½ teaspoon
600 g
1 teaspoon
Ingredients
Buttermilk
Salt
Sugar
Flour type 500
Dry yeast
375 ml
1 teaspoon
1 teaspoon
500 g
1 teaspoon
Program:
básico
or
francés
Program:
básico
or
francés
