17
MAIN PURGE:
• AUTO PURGE:
Set YES or NO
• AUTO PURGE DURATION TIME: Set fresh air purge duration to between 2 and 30 minutes.
• MAIN PURGE INTERVAL TIME : Set the interval between fresh air purges to between 10 and 120
minutes.
• AUTO ZERO CAL:
Set YES or NO to automatically re-zero sensors at the end of a
main purge cycle.
• AUTO PUMP FLOW:
Set YES or NO to automatically control the pump flow. This may
be required for some regulatory test protocols.
After switch on, the first purge interval is automatically set to 10 minutes if the optional IR module is
fitted. Changes in the purge interval are implemented after completion of the next purge cycle. To
implement a change immediately perform a “MANUAL AIR ZERO”.
PRINTER:
This sets the destination for outputs from the handset.
The choices of outputs are:
• KMIRP
• IRP-2
• ANALYZER PRINTER
• SERIAL
• BLUETOOTH
Use UP or DOWN keys to scroll through the selection. Press ENTER to select,
Summary of Contents for K9206
Page 29: ...29 ...
