Occurred fault
Cause
Removal
Soft pulse sounds
Stethoscope membrane is not on Place the stethoscope
the pulse location.
membrane at a new location;
perhaps get advice from an
authorized dealer or doctor.
Background noises
Movement of the arm or the
Do not move the arm
in the stethoscope
body during measurement
and do not speak.
Cuff is not pumped up
Internal venting valve is still
Close the internal venting valve
opened after ventilation.
through a strong pump squeeze
action.
Incorrect measured values
Incorrect cuff size
Ensure that you employ a cuff
that corresponds to your upper
arm circumference.
Unusual measured values
Incorrect cuff size.
Check conditions
Moving and/or speaking
and repeat measurement.
during the measurement.
Not remaining quiet.
What to do in case of measurement or operating faults?
If you do not obtain any results of measurement, please check whether the following causes could be the reason:
GB-50
G
Appendix
Appendix
Anleitung 50.indd 50
20.09.2006 15:08:11
Summary of Contents for visocor 50
Page 1: ...0123 Gebrauchsanleitung Directions for use Anleitung 50 indd 1 20 09 2006 15 08 06 ...
Page 6: ... A Gerätebeschreibung D 6 Gerätebeschreibung Anleitung 50 indd 6 20 09 2006 15 08 06 ...
Page 32: ... A Equipment description GB 32 Equipment description Anleitung 50 indd 32 20 09 2006 15 08 09 ...
