NINA-B50 series - Hardware integration manual
UBX-22021116 - R02
Pre-approved antennas list
Page 50 of 57
C1-Public
RF 2.4 GHZ whip antenna, ANT-2.4-CW-RH-RPS
Manufacturer Linx
Polarization Vertical
Gain
-1.0 dBi
Impedance
50
Ω
Size
Ø 7.4 x 27.0 mm
Type
Monopole
Connector
Reverse Polarity SMA plug (inner thread and pin receptacle).
Comment
To be mounted with a U.FL to SMA adapter cable.
An SMA version antenna is also available but not recommended for use
(ANT-2.4-CW-RH-SMA).
Approval
FCC, IC, RED, UKCA, MIC, NCC, KCC and ACMA
Wi-Fi external antenna, PN PRO-EX-348
Manufacturer Abracon
Polarization
Vertical
Gain
+3.0 dBi
Impedance
50
Ω
Size
Ø 12.0 x 28.0 mm
Type
Monopole
Connector
Reverse Polarity SMA plug (inner thread and pin receptacle).
Comment
The antenna adapter cable UF.L part must be mounted on a metal ground plane for
best performance. To be mounted with a U.FL to SMA adapter cable.
SMA version antenna is also available but is not recommended for use
(Ex-It 2400 28 SMA).
Approval
FCC, IC, RED, UKCA, MIC, NCC, KCC and ACMA
Wi-Fi / Bluetooth external antenna, PN PRO-EX-296
Manufacturer Abracon
Polarization
Vertical
Gain
+2.0 dBi
Impedance
50
Ω
Size
Ø 12.0 x 28.0 mm
Type
Monopole
Cable length 100 mm
Connector
U.FL. connector
Comment
This antenna requires to be mounted on a metal ground plane for
best performance. To be mounted with a U.FL connector.
For information on how to integrate the U.FL connector, see
RF
connector design
.
Approval
FCC, IC, RED, UKCA, MIC, NCC, KCC and ACMA
