NINA-B50 series - Hardware integration manual
UBX-22021116 - R02
Regulatory compliance
Page 48 of 57
C1-Public
6.8
Australia and New Zealand regulatory compliance
⚠
Approvals are pending for NINA-B501 and NINA-B506.
The NINA-B50 modules are compliant with the standards made by the Australian
Communications and Media Authority (ACMA).
The modules are compliant with AS/NZS 4268:2012 standard
–
Radio equipment and systems
–
Short
range devices
–
Limits and methods of standard measurement. The test reports for NINA-B50
modules can be used as part of the product certification and compliance folder. For more information
on the test reports, email the respective support team at the local mail address in your region. To
meet the overall Australian and/or New Zealand end product compliance standards, the integrator
must create a compliance folder containing all the relevant compliance test reports such as RF, EMC,
electrical safety and DoC (Declaration of Conformity). It is the responsibility of the integrator to know
what is required in the compliance folder for ACMA compliance.
For more information on Australia compliance, refer to the Australian Communications and Media
Authority web site
For more information on New Zealand compliance, refer to the New Zealand Radio Spectrum
Management Group web site
6.9
Safety compliance
For compliance with safety standard EN 62368-1, NINA-B50 series modules must be supplied with a
Class-2 Limited Power Source.
