NINA-B50 series - Hardware integration manual
UBX-22021116 - R02
Pre-approved antennas list
Page 49 of 57
C1-Public
7
Pre-approved antennas list
This chapter provides an overview of the different antennas that can be used together with the
modules.
⚠
All approvals are currently pending.
☞
Note that not all antennas are approved for use in all markets/regions.
7.1
Antenna accessories
Name
U.FL to SMA adapter cable
Connector
U.FL and SMA jack (outer thread and pin receptacle)
Impedance
50
Ω
Minimum cable loss
0.5 dB, The cable loss must be above the minimum cable loss to
meet the regulatory requirements. Minimum cable length 100 mm.
Comment
The SMA connector can be mounted in a panel.
Approval
RED, UKCA, MIC, NCC, KCC and ACMA
Name
U.FL to Reverse Polarity SMA adapter cable
Connector
U.FL and Reverse Polarity SMA jack (outer thread and pin)
Impedance
50
Ω
Minimum cable loss
0.5 dB. The cable loss must be above the minimum cable loss to
meet the regulatory requirements. Minimum cable length 100 mm.
Comment
The Reverse Polarity SMA connector can be mounted in a panel.
Approval
FCC, IC, RED, UKCA, MIC, NCC, KCC and ACMA
7.2
Single band antennas
NINA-B506 internal antenna
Manufacturer Abracon
Gain
+3 dBi
Impedance
N/A
Size (HxWxL) 1.1 x 3.4 x 10 mm
Type
PCB trace
Comment
PCB antenna on NINA-B506. The antenna should not be mounted inside a
metal enclosure.
Approval
FCC, IC, RED, UKCA, MIC, NCC, KCC and ACMA
GW.26 2.4 GHz monopole antenna SMA, GW.26.0111
Manufacturer Taoglas
Polarization
Vertical
Gain
+2.0 dBi
Impedance
50
Ω
Size
Ø 7.9 x 30.0 mm
Type
Monopole
Connector
SMA (M) .
Comment
To be mounted with a U.FL to SMA adapter cable.
Approval
RED, UKCA, MIC, NCC, KCC and ACMA
