http://www.CompeGPS.com http://Support.CompeGPS.com 9
3. Restore the card compartment taking care that it is correctly fitted
again.
2.4
Application status
From
‘Main menu > Status’
you can check the status of general functions of
TwoNav application.
Triplog (recording of itinerary):
‘Triplog’
is the command allowing you to
manage the recording of your itinerary, your itinerary will be recorded
when
‘Triplog’
is started.
Reception and position of satellites:
Check the number of satellites
available as well as their distribution orbiting over the vault and their
coverage.
By default, when TwoNav is launched, it will try to connect to available
satellites so that you can start working with GPS function. If GPS is
disconnected, TwoNav will not receive any position signal and many
application functions will stop working.
Possible states for GPS function:
Disconnected
Connected (without position)
Connecting
Connected (with position)
Error (not found)
Connected (with position) and
recording track
S
Simulating
Connect/Disconnect GPS function:
Press the central button to switch on/off the GPS of TwoNav.