http://www.CompeGPS.com http://Support.CompeGPS.com 53
8.1.7 Time zone
Set the time that will appear by default in the application according to the
Universal Time Coordinates (UTC). You may also set the summer time
automatically.
Note
: TwoNav keeps the time updated as long as the device receives a GPS
signal. Usually, inside the buildings the signal from satellites is not received
unless there is a repeater, so the time and night vision might be affected.
8.1.8 Coordinates
Type of coordinates:
UTM, Lat
itude/Longitude, BGN…
Degree format:
Configure the order in which the degrees are displayed.
Datum:
Used
to
translate
the
positions
of
elements
(waypoints/tracks/routes) to the exact position on the earth. Datum
systems is needed because the earth is an imperfect ellipsoid.
These settings will be used when introducing any coordinate into the application
as well as creating any element (waypoints/routes/tracks).
8.2
Map
8.2.1 Automaps
Auto-open maps:
Opens the most suitable map for each situation.
Auto-open on-line maps:
Opens the most suitable internet map.
Auto-open reliefs (*.CDEM):
Opens the most suitable elevation map for
each situation (enabled independently from
'Auto-open maps'
).
If these options are enabled, TwoNav will try to load the best map for each
situation:
‘On-Road’
mode:
The road map (*.VMAP) of the area will be loaded and
the rest will be closed.
‘Off-Road’
mode:
The map with the best resolution (not an *.VMAP) will
be loaded and any other road map (*.VMAP) will be closed.
Note:
It is highly recommended to have this option always on, specially on those
situations in which you need to make a change in navigation mode.