http://www.CompeGPS.com http://Support.CompeGPS.com 69
Use V-
Map’s routing speed
(
only in ‘On-Road’ mode)
:
Calculates the
estimated time of arrival taking into consideration the speed of the route.
Use navigated track time
(
only in ‘Off-Road’ mode)
:
Calculates the
estimated time of arrival taking into consideration the time of the track.
Interval for partial mean speed:
Calculates the estimated time of arrival
taking into consideration the partial mean speed of the selected interval of
time.
Cruise speed:
Expected mean speed according to the selected vehicle.
Default
‘Cruise speed’
value for each vehicle:
Pedestrian:
3 km/h
Bike:
15 km/h
Car:
80 km/h
Boat:
20 km/h
Note:
If no 'Routing speed' or 'Track time' are available,
‘Mean Speed’ will be
used to calculate the estimated time of arrival.
8.8.4 Slope
In order to get slope data, TwoNav requires you to set the distance values to
calculate the following data:
Slope calculation distance:
Used to calculate current
‘Slope’
data field.
Next slope distance:
Used to calculate
‘Next slope’
data field.
8.9
Tracklog
Set the type of track recording that will be generated for your navigation
according to your preferences:
Start
‘Triplog’
at power on:
TwoNav will automatically record by default
all your movements when you start using the application. This function is
very useful for users who forget to record the itinerary.
8.9.1 File
File format:
Set the track format of the resulting file.
Recording interval:
By time:
Set the time to create every new track point.
By distance:
Set the distance to create every new track point.