
http://www.CompeGPS.com http://Support.CompeGPS.com 10
Note:
TwoNav will attempt to fix your current position, but if you are
somewhere without GPS coverage (for example: inside a building), GPS
status will
turn into ‘Connected (without position)’.
Battery level:
Check the current battery level for TwoNav application.
Screen brightness level:
Set the general brightness level for the screen.
Audio level:
Set the general audio and the volume of each audible
element individually.
2.5
Recharging
Your GPS device may operate around a maximum of:
TwoNav Aventura:
20 consecutive hours with no need of recharging.
Device’s screen uses an important amount of energy resources, so it is
recommended to turn it off while not using it. By doing this simple action, the
battery life will be longer. Moreover, remember that the screen of the device will
be turned off after inactivity.
Battery life can be increased by reducing the level of screen backlight or by
turning the screen off when not in use (configuring the automatic shutdown
screen function or by activating the standby mode with a long press on
‘Hold’
key
and selecting
‘Block’
).
Configure more options at
‘Main menu > Settings > Autonomy’
Additionally, you can also recharge the li-ion battery of the GPS device using
several power sources:
Computer
: When connecting the device to a computer, besides allowing
you to manage the data present in the memory, the battery is also
charged.
Wall charger:
Charge the battery using a wall power point.
Car charger
: Allows you to charge the battery during
‘On-Road’
navigations.
AA battery
: Replaces the li-ion battery for 3 AA piles, increasing the
power of your device in case of emergency.