Rev: 2013.09.15.v004a
24
Coat all the mating surfaces with glue
and install as shown. Use stick pins or
tape if necessary to hold in position
while the glue sets up.
Top View.... double check that the
elevator SFG's are parallel to the
fuselage and perpendicular to the
elevator.
Install the wheels onto the axles. Holes
may need to be enlarged slightly.
Press the wood nut onto the axle. In
many cases the nut will not need any
glue to keep the wheel on, and if
flipping back and forth between wheels
and floats, this will make it easier.
Rear Cowling Bulkhead. Use the
cowling cover shown in the foreground
as a guide on how far back to locate the
rear cowling bulkhead.
Glue the rear cowling in place. Note, if
locating the ESC in this area, make
sure and remember to make clearance
for the wires.
