Rev: 2013.09.15.v004a
15
Fit the right lower fuselage part
together with the full fuselage side.
Note that the spar from the right side
sticks thru the hole....
.... and behind the spar of the full
section. The foam tab and slots should
line up better with the spars situated in
this configuation.
Fully engage the tabs and slots, taking
note of how it all goes together.
Continue to test fit the upper fuselage
half, taking not of how the open spar
fits into it's slot as the EPP tab and
slots are joined together.
Check that everything fully seats into
their respective areas and that the
orientation of parts matches the
manual photos
Make sure the pieces all match together
at 90 degrees to one another. Now that
you know how it goes together dis-
assemble and glue all the mating
surfaces per the next couple steps.
