Rev: 2013.09.15.v004a
16
Apply glue to all the mating surfaces of
the lower fuselage section as well as all
the mating tabs and surfaces.
With the nozzle of the Welder's tube,
force a small bead of glue into the slot
fo the strut spar.
Fit together as per the test fit
remembering to keep the free end of the
one spar behind the one in the full
fuselage section. Make sure all is
square and fully seated.
Fit the top fuselage section together as
in the test fit and make sure all joints
and tabs are fully seated.
Make sure everything is square. Let this
assemlby dry for about an hour before
handling.
One the glue on the fuse has set up
enough to handle, remove any extra
length of the spar from the end of the
landing gear as shown.
