Rev: 2013.09.15.v004a
21
Add the lower rudder fin. This is also
the time to glue the bottom of the
rudder to the back of the fuselage.
Glue the two piece together, making
sure they are square to each other.
Set them aside to dry.
Once dry the tail assembly can be
jointed to the fuselage. Do not put glue
on the bottom most part of the rudder,
this will be glued with the fin.
Let the assembly dry for an hour or so
before handling.
Install the ESC. In this case the ESC
will be installed under the cowling, but
in warm areas it should be left in the
open, exposed to good airflow.
