C2-1000 S
ERIES
O
PERATION
M
ANUAL
44
This screen provides a quick and easy way to store all current operating parameters.
The unit will remember the set up you are currently using at the time of data storage
and also when you next apply power. To store the current settings, press and
release the control button.
When turned on, the previously explained Adjust resolutions menu structure is
exposed. The default condition is ‘Off’, to prevent accidental changes.
In order for Autoset to work properly, it needs a sufficiently bright full-screen image to
examine. The sense level lets you change the brightness threshold for detection of
the screen edge between Low, Medium, High and V.high. Medium is the default
level, which is recommended for normal use (Windows-type images, etc.)
This parameter controls whether the ‘welcome’ screen is displayed or not on power
up for units with an on-screen display – it can be disabled as required. This is useful
when a unit is installed as part of an overall system.
This parameter is available on certain units and controls how bright the LEDs on the
front panel appear.
This menu item allows the adjustment of the serial baud rate used for RS-232
communications. The rate can be adjusted to 9600, 19200, 28800, 33600, 38800,
57600 and 115200. (This adjustment is provided for those instances where you wish
to use the RS-232 control system for your own purposes.) The default baud rate is
57600.
System
Push to store
System
RS232 baud rate [57600]
System
Autoset sense
[Medium]
System
OSD on power up [On]
System
LED brightness % [ 90]
System
Advanced Menus [Off]
