Page | 12
Note: Commands will not be executed unless followed by a carriage
return. Commands are case-insensitive. If the IP is changed then the IP
Address required for Telnet access will also change accordingly.
WebGUI Control
With the controller and PC/Laptop connected to the same active
network system, open a web browser and type device’s IP address on
the web address entry bar. A security page will appear to ask for User
and Password, please key in “admin” for the Username and
“adminpw” for the password then click Submit (these are factory
default passwords).
Note: The factory default IP setting for the controller is Static with
address of 192.168.1.50 and subnet of 255.255.255.0.
The browser will display the controller’s Macro Settings home page.
On the left you will find the main menu items for the controller:
Macro Settings, Extension Macro, Command Settings, Schedule,
Network Settings and System Settings.
