Page | 17
Command Settings
The overall number of commands stored on the unit is governed by
the length of the command strings. The total may vary according to
the length of each string. A maximum of 128 commands can be
stored if they contain fewer than 128 characters (including spaces).
Command strings over 128 characters can be used but will reduce the
overall number that can be stored.
To add or edit a command click on the selected ‘Edit’ button, the
‘Command Edit’ window will appear where you can enter the
command parameters.
Please note: ‘Remove’ immediately deletes all command data.
Command Label:
This is the name of the specific command and is
shown in the ‘Command Settings’ page and ‘Command Select’ page
when editing Macros.
Command Data:
All Command strings must be followed by
‘
\x0d\x0a’
(CR+LF) or it will not be executed.
Click on ‘Save Change’ to save the command inserted.
