Page | 7
Operation Controls and Functions
Front and Rear Panel
EU version
US version
Macro Buttons: Each button can support up to 16 commands and
has 2 LEDs, one red and one blue, adjustable from 0 to 100%. (For
further detail on settings please refer to the WebGUI Control
section)
Ethernet:
Connect to an active Ethernet connection, or direct to a
PC or Laptop. This connection supports PoE when connected to
an Ethernet switch that supports 48v PoE. The unit can be
powered without the external 5 volt DC power supply.
DC 5V:
Plug in the 5V DC power adaptor (included) and connect to
AC wall outlet. Please note, this not necessary if using PoE.
Relay out:
Connect to a device that requires 0 to 24V/8A DC
power via a relay or contact closure switch.
1T-CL-322
1T-CL-322
