Page | 24
Sample Application Diagram
In this example the unit is controlling multiple devices via a single
Ethernet port, this can be set to either Static or DHCP. PoE (Power
over Ethernet) is used which allows for greater flexibility in system
design and installation as a local PSU is not required. In addition to
the Ethernet port, 2x relay outputs are being used to trigger
mechanical devices such as motorized curtains and an electric screen.
Sample Ethernet Commands
These are examples of how to create command strings to control
equipment via the Ethernet port, in this instance to recall presets on
certain tvONE C2 and C3 products:
C2-2855
and
C3-510
.
The
C2-2855
requires two command strings to run a single preset. The
preset first has to be recalled before it can be loaded. All Command
strings must be followed by [
\x0d\x0a
] (CR+LF) or it will not be
executed.
1.
Recall preset #1
F0410410225000001??
\x0d\x0a
2.
Load preset #1
F04104102260000017E
\x0d\x0a
Please note: 600(ms) delay after the first command
C2-2855 scaler
AV source
Ethernet Switch
Audio amp
1T-CL-322
ON
ON
VC
PC1
PC2
OFF
BR
OFF
Mute
50%
75%
Lighting Controller
Curtain Controller
Ethernet
Relays
48v PoE
