TV One C2-2375A Series, Operation Manual

Page: 98 / 101

C2-2375A S
ERIES
O
PERATION
M
ANUAL
93
15 SPECIFICATIONS
15.1 Video Inputs
Connection: (CV, YC on DVI-U or BNC break-outs)
Input impedance: 75 Ohm
Television standards supported: NTSC and PAL
CV/YC video decoder: 8-bit Digital
De-Interlacing (NTSC / PAL up-conversion only): pixel-level motion adaptive with
noise reduction
Comb filter decoding: adaptive
Film mode (NTSC) 3:2 pull down for up-conversion
CV/YC Video adjustments: contrast, brightness, saturation, hue (NTSC)
15.2 Reference Input
Connection: CV or Tri-level HD (720p, 1080i, 1080p) on BNC
CV/YC sub-carrier lock range: +/- 200Hz for NTSC Operation, +/- 250Hz for PAL
Operation
15.3 Computer Digital Inputs
Connection: DVI-D (on DVI-I connector) supporting up to 162MHz (1920x1200 @
60Hz).
Supports HDCP repeater functionality.
EDID 1.3 data on DVI-D connector to communicate available resolutions.
Compatible with HDMI inputs (change EDID setting in Adjust sources).
Supports audio input when HDMI input active.
15.4 Analog inputs
Connection: RGBHV / YPbPr on DVI-I connector, or BNC break-out
Analog RGB/YPbPr supporting RGBHV, RGBS, RGsB, YPbPr, auto-terminating
into 75 Ohm
Digital sync (in RGBHV or RGBS mode): TTL Level, 10K termination, pos or
negative
Analog sync (in RGsB, YPbPr, YUV modes): 0.3v negative.
Analog RGB Level Range: 0.5-2.0 Vp-p approx.
De-Interlacing (YUV/YPbPr only): pixel-level motion adaptive with noise reduction
Scan Rate Detection: automatic
Analog PC Resolutions: any up to 2048x2048
Analog HDTV Resolutions: any up to 1080p
Analog max horizontal scan rate: 150kHz
15.5 Video Outputs
Connection: (CV, YC on DVI-I or BNC break-outs)
Output impedance 75 Ohm
Television standards supported: NTSC and PAL