C2-2375A S
ERIES
O
PERATION
M
ANUAL
28
The SDI output is active whenever the ‘Output res’ in ‘Adjust output 1’ is set to an
SD/HD or 3G-SDI compatible resolution. Typically these are PAL, NTSC, 720p,
1080i and 1080p resolutions.
Both SDI outputs are identical, and follow whatever Output 1 (e.g. DVI-U output 1)
is showing.
7.4
GENLOCK input
The Genlock input supports Composite Video (PAL or NTSC), along with tri-level
HD signals (i.e. 480p, 720p, 1080i and 1080p).
You can enable locking to this reference source using the LOCK button on the front
of the unit. The LOOP output is a buffered copy of the GENLOCK input, and
remains active when the system is in Standby mode.
7.5
Audio
The standard unit does not support any audio I/O connectors, but any audio
embedded into an HDMI or SDI source can be routed to any output. This is done in
the ‘Adjust outputs’ menu.
7.6
System block diagram
The following block diagram should help to explain the way that the unit works
internally.
4x2
Cross-point
DVI- U 1
DVI-U 2
Scaler
Lock
source
Keyer
Keyer
Mixer
SDI
REF
Scaler
DVI-U1
&
SDI
output
DVI-U2
output
Summary of Contents for C2-2375A Series
Page 1: ...C2 2375A SERIES OPERATION MANUAL C2 2375A Universal Scaler PLUS Operation Manual...
Page 5: ...C2 2375A SERIES OPERATION MANUAL 16 CONTACT INFORMATION 96...
Page 26: ...C2 2375A SERIES OPERATION MANUAL 21 4 PRODUCT IMAGES...
Page 97: ...C2 2375A SERIES OPERATION MANUAL 92 You can select the serial standard in the System menu...
