TV One C2-2375A Series, Operation Manual

Page: 27 / 101

C2-2375A S
ERIES
O
PERATION
M
ANUAL
22
5 UNPACKING AND INSTALLATION
5.1 Shipping Carton
Your unit will arrive double boxed for maximum protection during shipping. You are
encouraged to retain both boxes and all packing material so the unit can be
returned in the unlikely event that repairs should ever become necessary.
5.2 Important Safety Instructions
The AC power cable furnished with the unit should conform to the type in use in
your country. Please compare the plug on your cable with the power socket where
the unit will be installed.
If you did not receive the correct cable , DO NOT attempt to modify it. Instead,
immediately contact your dealer or contact TV One at the sales office nearest to
your geographic location and request the proper cable.
Installation should be made such that the system fans are not touching other pieces
of equipment, and such that they may not be accidentally touched by users.
5.3 Initial Operation Check Using Factory Default Settings
This product can be operated via multiple methods, but for the purposes of initially
acquainting you with the operation of the unit, this manual will address the
operation using the Front Panel controls.
If you have problems using the unit as described below, see the ‘Factory reset’
description shortly afterwards.
We’ll be using a Personal Computer for a signal source and a PC monitor that can
support 1024 x 768 @ 60Hz as this is the default output resolution.
Disconnect the cable going from a Personal Computer’s Monitor to the Personal
Computer. Connect the output from the PC video card (the PC connector formerly
used by the monitor cable) to the input on the rear panel of the unit.
Next, take the cable from the PC monitor and connect it to the unit’s output. Then
connect the AC power cable to a working AC outlet, turn on the PC, monitor and
then your unit.
Provided you have not changed anything from the Factory Defaults then your PC’s
image should appear on the display as normal.