TV One C2-2375A Series, Operation Manual

Page: 49 / 101

C2-2375A S
ERIES
O
PERATION
M
ANUAL
44
Setting Result
Fill
(default) The source is stretched to fill the output.
Aspect The source’s aspect ratio is maintained on the output.
H-fit The source is stretched to fill the horizontal dimension of the output, with
the vertical dimension stretched by the same amount (and possibly
clipped).
V-fit The source is stretched to fill the vertical dimension of the output, with
the horizontal dimension stretched by the same amount (and possibly
clipped).
1:1 Each source pixel is represented by a single output pixel – no scaling
will be performed. If the input resolution is higher than the output, then
only part of the source will be seen. If the input resolution is lower than
the output, then a black border will be present.
This menu item allows manual positioning of the Top and Left portion of the image.
It is used to ensure that the input signal is captured correctly, eliminating any black
borders. These settings are often used to correct the position of a PC signal on an
input, or to eliminate any undesired noise at the top or bottom of a PAL or NTSC
video source.
This menu item allows manual positioning of the Bottom and Right portion of the
image. These settings are often used to correct the position of a PC signal on an
input, or to eliminate any undesired noise at the top or bottom of a PAL or NTSC
video source.
If your unit has an internal audio switcher / selector, this menu item selects the
desired Audio input for use with the active video source, allowing an audio-follow-
video function.
If an external audio switcher is connected via the OPTION bus, then this menu item
selects the desired Audio input for use with the active video source, allowing an
audio-follow-video function.
Source: RGB1
OPTION audio source [ 1]
Source: RGB1
Audio input source [ 1]
Source: RGB1
BR size adj. [ 0] [ 0]
Source: RGB1
TL pos. adj. [ 0] [ 0]