TV One C2-2375A Series, Operation Manual

Page: 36 / 101

C2-2375A S
ERIES
O
PERATION
M
ANUAL
31
2. This unit has two outputs which have been split into two menus ‘Adjust
output 1’ and ‘Adjust output 2’. The manual details both of these menus in
the single section ‘Adjust outputs’.
8.2 Adjust presets menu item
Presets allow you to store up to 10 different setups of window size, position and
keying controls. These are non-volatile and can be instantly recalled at a later time.
They are only erased during a firmware update of the unit.
Presets only store and recall values in the Adjust outputs, Adjust windows, Adjust
keyers, Adjust borders and Adjust logos menus (where your unit supports these).
To store values present in the ‘Adjust sources’ menu, use the ‘Push to Store’ menu
item found in ‘Adjust system’ or the special buttons on your unit..
Once you have set your unit up in the way you want it to be, simply select the
Preset number you want to store the setup detail into, and select the ‘Store’ item.
At a later time, you can then recall the whole setup by again selecting the correct
Preset number and clicking on the ‘Load’ item.
The ‘Erase’ item only erases the select Preset number – all other Presets are
unaffected. Erasing a Preset returns all those settings to Factory Defaults.
Some units will have dedicated PRESET buttons, in which case:
1. Press and release to Load the Preset
2. Press and hold to Store the current settings to the Preset
3. Press and hold for much longer to Erase the Preset.
8.3 Items Associated with the Adjust outputs group
This menu group allows adjustments to be made that specifically affect the output
of the unit, including output resolution and locking/overlaying onto a computer or
video source.
This menu item allows the lock mode to be selected and the lock source to be
defined. The top line of the display shows the current detected resolution of the
800 x 600 60Hz
Lock mode [Off] [RGB1]
Adjust preset
[1] Load Store Erase