TV One C2-2375A Series, Operation Manual

Page: 32 / 101

C2-2375A S
ERIES
O
PERATION
M
ANUAL
27
The DVI-D input accepts DVI digital connections (but on a DVI-I socket for added
flexibility). An EDID signal is used to ensure that the PC or DVD player outputting
the DVI signal knows the available range of resolutions in the unit.
To enable an input for HDMI usage, set the ‘EDID to use’ to [HDMI] in ‘Adjust
sources’. Once active, the DVI-U input will also accept audio via the HDMI link.
The table below shows how to select a particular input using the ‘Adjust source’ /
‘Input type’ menu:
Source Connection Input type setting
DVI-D DVI-U Auto / D-RGB
HDMI* DVI-U Auto / D-RGB / D-YUV
RGBHV / RGBS / RGsB DVI-U Auto / A-RGB
YPbPr / YUV DVI-U Auto / A-YUV
CV DVI-U on ‘Green’ Auto / A-CV
Y/C DVI-U on ‘Blue’/’Red’ A-YC
RGBHV / RGBS / RGsB BNC panel B-RGB
YPbPr / YUV BNC panel B-YUV
CV BNC ‘Green’ B-CV
Y/C BNC ‘Blue’/’Red’ B-YC
*For HDMI, also set ‘EDID to use’ in ‘Adjust sources’ to [HDMI]
7.2 Computer & Video outputs
The DVI-U outputs can be:

Digital DVI-D or HDMI signals

Analog Composite Video

Analog Y/C (S-Video)

Analog RGBHV (separate syncs at TTL levels)

Analog RGsB (sync on green)

Analog RGBS (separate sync at TTL levels)

Analog YUV/YPbPr (including tri-level)
When the output resolution (as set in ‘Output res’) is set to PAL or NTSC, then the
DVI-U connectors will output the Composite Video and Y/C signals. For all other
resolutions, the output type is set in the corresponding ‘Adjust output’ menu.
The analog outputs are replicated for Output 2 on the BNC connectors above it.
HDMI output is automatically enabled based on the display connected to the unit.
7.3 SDI inputs and outputs
All SDI connections are SD/HD/3G compliant.
The input will auto-detect the particular standard in use. The LOOP output will then
output a copy of that signal (re-clocked).