ACM 400 S motor control unit
5 / 24
4) Requirements
The motor control unit is not operational until it is installed in the ready for use gate
system.
This requires external components such as e.g. ...
command input
devices,
signalling devices
,
sensors
and
the
drive unit
,
but which are not supplied with this motor control unit.
This control unit is therefore a "non ready for use component" from a legal point of
view. It therefore does not fall within the scope of various EC Directives until it is
integrated in the end product (gate system).
a) Legal requirements
The end product manufacturer is thus responsible for compliance and declaration of
CE conformity
. The control unit complies with the requirements in
DIN EN 60204
EN 13241-1
EN 61000-6-2
EN60335-1
EN 12445
/
EN 12453
EN 13849-1
b) Technical qualification requirements
These instructions require
technical knowledge
, which corresponds to completed
vocational training in at least one of the following job profiles:
Electrical fitter
,
Electrical installation fitter
,
Electrical machine fitter
,
Electro-mechanic
,
Industrial electronics technician
...
or knowledge as an (electrically)
skilled person
according to the German accident
prevention regulation
BGV A2
(VBG 4).
The product is supplied as a component in
"especially EMC-expert firms"
in
accordance with EMC law.
