Page 45 of 57
10.2.
Turning on the autoclave
When the power is off the door is locked.
To start the system, press the main white switch (1) on the right side
of the autoclave.
When the unit is turned on heating begins. The chamber is preheated
and the symbol is displayed until the process is completed. The
steam generator is also heated and the symbol is displayed until
the generator is ready. Sterilization cycles cannot be started until the
unit is ready.
NOTE:
\
If the unit is in the Vacuum Test mode the heaters are turned
off.
When the unit is ready the pre-heating symbol is replaced by the
next load number (see picture below).
10.3.
Opening the door
Place your thumb on the plastic door cover right above the locking
mechanism (1) and the other fingers in the handle (3).
Pull the handle (2) until the door lock is released.
Open the door.
10.4.
Loading
Load the autoclave properly according to instructions in section 9.
Compatible goods.
Do not overload.
1
1
3
2
