Page 35 of 57
7.3.
Setting the Clock
This directory enables the operator to set the time and date.
The
SET CLOCK
screen is displayed when entering the
SET
CLOCK
directory:
When entering the directory the curser will be blinking on the "hour"
digit.
The time is displayed in the upper row in the form “hh:mm:ss”. The
hour range is 24 hour (i.e. from “0” to “24”).
The date is displayed in the lower row in the form “DD:MM:YYYY”.
1.
To increase or decrease the time or the date use the
UP
and
DOWN
keys.
2.
To move the curser from one digit to another press the
START/STOP
key.
3.
After changing the time and the date move the curser to “
SAVE
”.
4.
Confirm the new time and date by pressing the
UP
key. While
the new time and date are being saved the following screen is
displayed:
5.
After saving is completed, the
SET CLOCK
screen is displayed
again, move the cursor to
EXIT
and press
UP
to return to the
previous
MENU
screen.
6.
The printer will print the date in the format DD:MM:YYYY if
the chamber temperature is being displayed in
˚
C. It will print the
date in the format MM:DD:YYYY if the chamber temperature is
being displayed in
˚
F.”
