Tuttnauer 6671130, Operation & Maintenance Manual

Page: 89 / 143

MAN205-0195042EN Rev. A Aug. 2011
Page 83 of 137 pages
Notes:
1.
The procedures done by the ―User‖ referred in the Preventive and Periodical
Maintenance, must be performed by trained personnel only.
2. Keeping the inside of the autoclave clean will lengthen its life and its proper
operation.
3. Ensure the chamber is empty and cold during all cleaning.
4. For all cleaning use ordinary household stainless cleaner, and rinse first with
tap water, and then with distilled or mineral free water.
5. Use only mineral-free water for the steam generator as detailed in the Water
Quality paragraph, (If applicable).
6. Keep the door closed between sterilizing cycles.
7. If you see or hear anything extraordinary, stop using the autoclave and call for
service.
Periodical Tests
1. Once a year calibrate and validate the autoclave.
2. Periodical safety tests (pressure vessel and electricity) shall be
performed by an Authorized Inspector at intervals as required by the
local laws, rules or regulations.
Periodical safety tests should be performed by an authorized inspector at
intervals as required by local law, rules or regulations.
Notes:
Ensure periodical tests are done on time!
Warning!
It is strictly forbidden for any person to enter the service area behind the service
access panels, except the trained technician.
If, for any reason it is necessary to open the service access panel, the person
must shut the system by pressing the emergency switch, withdrawing the key and
keeping the key on him, to prevent accidents and injuries.
The technician must follow the instructions in the SERVICE INSTRUCTIONS,
“Working with power ON in Service Area” Section.