Tuttnauer 6671130, Operation & Maintenance Manual

Page: 65 / 143

MAN205-0195042EN Rev. A Aug. 2011
Page 59 of 137 pages
5. PRINTER
5.1 Printer Output
The autoclave is equipped with a character printer, which prints a detailed history of
each cycle performed by the instrument (for the record or for subsequent consideration).
The printing is made on plain paper with 24 characters per line and contains the
following information:

Software version

Real time

Selected program

Sterilization pressure

Sterilization temperature

Sterilization time

Summary of performed cycle and identification hints.
When the sterilization cycle begins the printer starts printing the above data.
After the preliminary printing, the autoclave starts performing the sequence of operations
of the cycle. The measured values of temperature and pressure are printed at fixed time
intervals, according to the phase of the process, as shown in the table below.
The data is printed from the bottom up, beginning with the date and ending with ―O.K.‖
for a complete cycle or ―FAIL‖ for an aborted cycle.
For an example of a typical printout, see next page.