Page 20
Notes on treatment of thermal papers:
Store the papers in a dry, cool and dark place.
Do not rub the papers with hard substance.
Keep the papers away from organic solvent.
Cautions!
Never disassemble the printer. Failure to follow this
instruction may cause overheating or burning of the printer
or the AC adapter. Or an electric shock, which may lead to
fires or accidents
.
Never use the printer in a place of extreme humidity or any
place where it can possibly be splashed by any liquids. If
any liquids get into the printer, it could lead to fire, electric
shock, or other serious accidents
.
Never touch the thermal head immediately after printing
because it becomes very hot. Make sure that the thermal
head is cool before setting papers or cleaning the thermal
head.
Power OFF the autoclave in any of the following cases:
The printer does not recover from an error.
Smoke, strange noise or smells erupt from the printer.
A piece of metal or any liquid touches the internal parts or slot of the
printer.
4.2. Displayed Error Messages / Symbols
The failures are divided into two categories:
Failures that occur before completing the sterilization stage, which in
this case will leave the load unsterilized
Failures that occur after completing the sterilization stage, which in this
case will leave the load sterilized
For the list of Displayed Error Messages / Symbols see chapter 11.
4.3. Displayed Operational Messages/ Symbols
Message /
Symbol Name
Message / Symbol
Description
Required Action
This symbol is displayed
when the door is open.
Close the door.
"Door is open"
This message is displayed
when the door is opened: In
stand–by, if start key is
pressed.
Close the door to perform
a new cycle.
If the problem persists,
call the technician.
