Page 36
11.TROUBLESHOOTING
Only technical personnel having proper qualifications and holding
technical documentation (including a technician manual) and adequate
information are authorized to service the apparatus.
Problem/
Error
Message
Message / Symbol Description
Corrective Action
Display is not
activated
The main switch is in the off position.
The power cord is not connected
properly to the machine and the
power source.
There is no electrical power in the
main source.
Turn the main switch on.
Make sure the power cord is
properly connected to the
machine and the power
source.
Fix the electrical power
supply.
The printer
does not print
The paper is not inserted correctly in
the printer.
Make sure the paper is
inserted
in
the
printer
correctly. See 4.1. Switch the
machine off then back on. If
the printer prints the date and
time, the printer is O.K.
"Chamber
temperature
not in range"
This message is displayed if the
temperature in the chamber is too
high or too low from the normal range.
Wait until the the chamber
reaches the normal range
temperature.
"Chamber
pressure not
in range"
This message is displayed if the
pressure in the chamber is too high or
too low from the normal range.
Wait until the the chamber
reaches the normal range
pressure.
"RTC Error -
Please Set
Current Date
and Time"
This message is displayed in order to
set the date and the time.
Set Current Date And Time.
If the problem persists, call the
technician.
