TurboChef HIGH H BATCH 2, Service Manual

Page: 37 / 82

OPERATING
THE
OVEN
21
Figure 22: Inserting Smart Card into Reader
Figure 23: Loading from Smart Card
LOADING . . .
FROM CARD
Step: 3
Step: 4
Figure 24: Saving to Smart Card
SAVING . . .
TO CARD
Step: 4
Step: 5
Ordering a Smart Card
To order a Smart Card, call 1-800-90TURBO,
+1 214-379-6000, or your Authorized Distributor.
Loading Menu from Smart Card
CAUTION: Loading a menu from a smart
card will overwrite all existing recipes
programmed into the oven.
To load a menu from a smart card:
1. Ensure the oven is either cooling down or off.
2. Insert the smart card into the smart card reader.
Orient the card as shown in Figure 22.
3. Press the bottom-left soft key.
4. Press the middle-left soft key to “Load Menu
from Card” (Figure 23).
5. Press Enter to confirm or Back/Stop to cancel.
After approximately 5 seconds, screen will display
that menu has loaded from card.
Saving Menu to Smart Card
CAUTION: Saving a menu to a smart
card will overwrite all existing recipes
programmed on the smart card.
To save a menu to a smart card:
1. Ensure the oven is either cooling down or off.
2. Verify the Write Card function is enabled (for
instructions, see page 17).
3. Insert the smart card into the smart card reader
Orient the card as shown in Figure 22.
4. Press the bottom-left soft key.
5. Press the top-left soft key to “Save Menu to
Card” (Figure 24).
6. Press Enter to confirm or Back/Stop to cancel.
Checking Recipe Counter
To view how many times each recipe (food item)
has been cooked:
1. Press and hold the middle-left or middle-right
soft key for two seconds.
2. The screen will display food items in the first
food group. To view other food groups, use the
Up and Down keys.
3. Press the Back/Stop to exit the menu.
NOTE: To erase counters, press Enter when
viewing the totals.