TurboChef HIGH H BATCH 2, Service Manual, Page: 10 / 82

ii SAFETY INSTRUCTIONS
Preventing Oven Damage
£
Clean the oven daily (page 9). Failure to do so will adversely affect cooking performance and shorten
the life of the oven.
£
Once per month or more frequently depending on use, perform the deep cleaning procedure (pages
10-11). Failure to do so will adversely affect cooking performance and shorten the life of the oven.
£
Clean the oven only with TurboChef Oven Cleaner.
£
Operate the oven only when food is in the cook chamber.
T
DO NOT clean with a water jet.
T
DO NOT slam or mishandle the oven door.
T
DO NOT frequently open and close the door to check the cook status of the food.
T
DO NOT allow cleaning solution or water to remain in the cook chamber after cleaning or at
any other time.
£
When servicing this appliance, do not tear insulation to get to components. Rather, find the edge of
the insulation and remove the tape that holds it in place.
Grounding Instructions
WARNING: Improper grounding increases the risk of electric shock.
This appliance must be grounded. It is equipped with a cord that has a grounding wire and plug, which
in the event of an electrical short circuit reduces the risk of electric shock by providing an escape wire
for the electric current. The wire must be plugged into an outlet that is properly installed and grounded.
Consult a qualified electrician or serviceman for more information on grounding instructions or to
determine if the appliance is properly grounded.
T
DO NOT use an extension cord. If the power supply cord is too short, ask a qualified electrician or
serviceman to install an outlet near the appliance.
Power Cord Replacement
To avoid potential hazards, only the manufacturer, an authorized service agent, or a similarly-qualified
person should replace a damaged power cord.