TurboChef HIGH H BATCH 2, Service Manual

Page: 34 / 82

18 OPERATING THE OVEN
Enabling/Disabling Done Screen
Reference Figure 17. Enabling the Done screen
allows the operator to:
£
Save an adjusted cook time
£
Cook an item longer after it reaches the end
of its cook cycle
Disabling it helps ensure all originally-programmed
cook times remain unaltered. By default, the Done
screen is enabled.
To enable/disable the Done screen:
1. From the Options menu, press the “Done
Screen” soft key (middle right) to turn the Done
screen on or off.
2. Press the Back/Stop key to exit.
Demonstration Mode
When enabled, demonstration mode will prevent
the oven from heating. This mode should remain
off unless otherwise instructed by TurboChef.
EDIT MENU ON
ERASE MENU
WRITE CARD OFF
TIME SCREEN ON
OVEN OPTIONS
DONE SCREEN ON
DEMONSTRATE OFF
Figure 17: Enabling/Disabling the Done Screen
Step: 2
Here the Done screen is turned on.
Step: 1
To access the Options menu,
press and hold either key for two seconds.