7.
Wi-Fi connection setup
In order to upload the SunBox to the cloud and be able to see the monitoring
of the system, it is essential to connect the equipment to the internet. To do this,
the following steps must be followed:
Step 0: Locate the serial number of the logger
At the bottom of the inverter there is a plate with a QR code, the serial number
of your logger and the logger's wifi access password.
The logger creates a Wifi network whose name is "AP_" followed by the serial
number of the logger.
Step 1: Connect to the Wifi network
With an electronic device with Wi-Fi (PC, Tablet,
Smartphone…)
the connection
with the
logger’s
Wi-Fi is established:
Open the wireless network connection of PC, Tablet or Smartphone
Click on view available wireless networks
Select the one corresponding to the device with which you want to connect
(identified by "AP_" and the serial number of the logger)
Enter the password that appears on the
logger’s plate
together with the serial
number.
