3 TRANSPORT
The ROTERRA power harrow can be transported on the
tractor’s 3 point hitch.
- For transport on public roads the maximum working width
allowed by law should be taken into account.
Transport width of a 3,00 m ROTERRA power harrow
remains confined to 3,00 m provided that the soil deflec-
tors are folded up whilst the locking pins of the floating
system should be placed in the quadrants from the inside
(fig. 5).
- For locking the soil deflectors, the hole in the support
should be used (fig. 6) which ensures optimum folding of
the soil deflector to the inside.
Use all such lighting and warning signals as are manda-
tory by law.
For transport on public roads: make sure that the front
axle weight is sufficient (fit front weights, if necessary)
and that the rear axle weight allowed as a maximum is not
exceeded.
NEVER allow the PTO shaft to rotate when the machine is
lifted
4 MACHINE ADJUSTMENTS
4.1
Working depth
- Lift the ROTERRA power harrow so that the locking pins
(fig. 7) in the quadrants can be adjusted.
- Place the pins in the hole which matches the required
working depth. When the ROTERRA power harrow is
lowered into the soil, the upper part of the lever arms hits
the pin upon attaining the required working depth.
32
5
!
6
7
