Tube-Line TL5500 2004, Owner'S Manual

Page: 61 / 71

Customer supplies own light brackets mounted on top of side guards.
Light package consists of 3 lights and one on/off toggle switch.
Usually the lights are mounted with 2 lights facing to the rear and 1 facing to the front.
The toggle switch can be mounted by drilling a ½” hole into the side of the control panel, be careful that you
don’t damage wires on the inside. Install the switch and wire it into the top of fuse block. By wiring it this way the
lights are fused through the control panel.
The Alternator is a one-wire model and the only wire needed is a 10 ga wire to the positive battery wire.