Page
41
of
110
The Mode Permissions Menu
By default, all Operational Modes are enabled at factory except for the optional licensed modes listed on
Page 9 of this manual.
TSL recommends that the following be considered before deciding upon which Operational Modes should
be Enabled or Disabled for the user:
What is the application?
Where will the unit be located?
Who is/are the user(s)?
In most instances, you may find that only 1 or 2 Operational Modes are required for your users
Source
Select
Button
Menu Item
Description
1
Meters (Multi)
Determines if Meters (M) Mode (see page 17) is available to the User
2
Meters (Single)
Determines if Meters (S) Mode (see page 19) is available to the User
3
Video (Multi)
Determines if Video (M) Mode (see page 21) is available to the User
4
Video (Single)
Determines if Video (S) Mode (see page 23) is available to the User
5
Mix
Determines if Mix Mode (see page 25) is available to the User
6
Names
Determines if Names Mode (see page 27) is available to the User
7
Phase Meter
Determines if Phase Meter Mode (see page 29) is available to the User
8
More Modes
Provides access to further Modes
