Page
12
of
110
Selecting SAM-Q-SDI Operational Modes
The SAM-Q-SDI provides multiple modes of operation, allowing you to choose the most suitable mode for
your workflow, application or personal preference.
Each operational mode determines what is displayed on the front panel displays as well as the behaviour
of the front panel controls
Switching between operational modes may be achieved using Function buttons 1 and 2 (see below)
Item Name
Standard Function
Extended Function
2
Function 1 button
Switch to Previous
Operational Mode
Press and Hold for 1 second to Enter and Exit Menus
3
Function 2 button
Switch to Next
Operational Mode
Press to delete name entries in System Menu
Only those Operational Modes that have been Enabled will be available for selection using Function buttons
1 and 2 (see The Mode Permissions Menu on Page 36 for further information)
Functions assigned to buttons F1 and F2 are configurable (see page 66 for further information). If configured
to perform functions other than ‘Switch to Previous Operational Mode’ or ‘Switch to Next Operational
Mode’, mode selection can be performed directly in the User Menu (see page
36 for further
information).
