39
The four connection cables of the receiver have to be connec-
ted to the machine control.
The exact connection terminals can be found in the respective
circuit diagram of the machine.
ATTENTION:
work on the control box of the machine should
only be undertaken by specially trained persons. Tschorn
GmbH is not liable in any way.
The following graphic shows the cable assignments:
- 12-24V --> power supply
- 0V
--> ground
- Probing --> probing signal
- Error --> battery empty, probing error
By default, the probing signal has 0V and puts the applied
voltage through when the probing is successful.
The error signal is set by default to „high“ (applied voltage)
and puts the signal to 0V in case of an error.
If you need an inverted signal, please contact us, the signals
can be reversed without any problem.
Connecting to the machine
Summary of Contents for TSCHORN4.0
Page 1: ...Bedienungsanleitung Operating instructions ...
Page 54: ...52 Notizen notes ...
Page 55: ...53 Notizen notes ...
