33
Since the signal transmission occurs with workpiece/ tool
contact, care should be taken that no coolant or chips adhere
to the probing surfaces.
The repeatability of ±3 µm is achieved with a probing speed
of 10 mm/min.
The receiver does not necessarily have to be placed in the
working space, it can be mounted at any position inside or
outside the machine. Magnets are added on the back for easier
mounting.
Very thick-walled machine housings or very long distances
between transmitter and receiver can infl uence the signal
transmission and possibly lead to worse results.
In general, the better the connection/ communication, the
better the probing results.
Performance data
Summary of Contents for TSCHORN4.0
Page 1: ...Bedienungsanleitung Operating instructions ...
Page 54: ...52 Notizen notes ...
Page 55: ...53 Notizen notes ...