3. Lift out, turn or replace the wearing plate by squeezing it off
with two screwdrivers once the running surface has receded
approx. 0.2 mm (observe the outside ring = "wear mark").
5.6
Changing the power cable
If the power cable is to be replaced, it should be procured from
the manufacturer or an authorized dealer to avoid safety haz-
ards.
Note
For TRUMPF service addresses, see www.trumpf-power-
tools.com.
5.7
Replacing carbon brushes
The motor comes to a standstill whenever the carbon brushes
are worn out.
Note
For TRUMPF service addresses, see www.trumpf-power-
tools.com.
Ø
Change the carbon brushes.
E543EN_06
Changing the power cable
21
Replacing the wearing plate