5.3
Lubricating the cutting tool guide
S
Grease nipple
Fig. 39417
Ø
Lubricate the grease nipple (S) on the cutting tool guide with
a grease gun.
5.4
Checking the cutting tool guide
Ø
Replace the cutting tool guide (6) if the play between the cut-
ting tool guide and cutting tool exceeds 0.3 mm
(see "Fig.
39412", pg. 5)
.
5.5
Checking and replacing the wearing
plate
1. Remove the carrier (9)
(see "Fig. 39415", pg. 11)
.
2. Check the wearing plate (18) for scratch marks.
20
Maintenance
E543EN_06
Checking the wearing plate
