The cutting tool for mild steel and high-tensile sheets has two
cutting edges. It only has to be reground if both edges are blunt.
Notes
■
Maintain the minimum length of the cutting tools
(see "Tab.
4", pg. 10)
.
■
Do not use shorter cutting tools.
■
Dress the cutting edge with an oil stone after regrinding.
Ø
If both cutting edges are blunt, regrind the cutting tool level
(90°) on the grinding face.
5.2
Changing the cutting tool
Note
The cutting tool can be reground.
It can be reground if necessary.
18
Maintenance
E543EN_06
