2.
Description
1
Bow-handle (installable in 2
positions)
2
Eccentric shaft
3
Roller holder
4
Spiral bevel gear
5
Stripper
6
Cutting tool guide
7
Rest plate
8
Pressure die
9
Carrier
10 Locking mechanism for carrier
11 Clamping lever for fastening the
handle
12 On/Off switch
13 Release-lock knob
14 Spindle wheel
TruTool TKF 1100 (1A1)/ TruTool TKF 1101 (1A1)
Fig. 39412
2.1
Intended use
The TRUMPF TruTool TKF 1100 (1A1)/ TruTool TKF 1101 (1A1)
beveler is an electrically powered hand-held device for the fol-
lowing applications:
■
Preparation of all K-, V-, X-and Y-shaped welding grooves
usual for gas and electrical fusion welding with various con-
tinuously adjustable angles of bevel and continuously adjust-
able lengths of bevels.
■
Bevelling of straight and curved edges, provided the mini-
mum radius of the inner curve is 40 mm.
■
Bevelling of edges on level and crooked workpieces, in par-
ticular tubes with an inside diameter of at least 80 mm.
■
Bevelling of edges in both directions, with the bevelling proc-
ess being able to be started and finished at any point of the
sheet edge.
■
Bevelling of edges in normal position (carrier below the
machine) and in "upside-down position" (carrier above the
E543EN_06
Description
5