4. Pull out the mains plug.
4.2
Working with the TruTool TKF 1100/
TruTool TKF 1101
Notes
■
Do not move the machine towards the workpiece until full
speed has been reached.
■
In order to improve the cutting result and increase the
service life of the cutting tool, coat the cutting track with
oil before machining the workpiece.
1. Processing material: position the machine on the sheet and,
at first, keep a distance of a few centimeters between the
cutting tool and sheet edge.
2. Push the machine carefully as far as possible against the
sheet edge i. e. "piercing".
3. Push the machine along the sheet in such a manner that the
machine axis is about parallel to the sheet edge, while press-
ing the machine against the sheet edge.
4.3
Changing the cutting direction
The tool or cutting direction can be turned 90° clockwise or
counter-clockwise in the event of confined space conditions.
1. Open the locking mechanism.
2. Turn the carrier 90° in the desired direction.
3. Close the locking mechanism again.
16
Operation
E543EN_06
