9
Carrier
10 Locking mechanism
16 Cutting tool
18 Wearing plate
F
"G1" lubricating grease
Fig. 39418
1. Undo the locking mechanism (10).
2. Turn the carrier (9) 45°.
3. Pull out the carrier (9) downwards.
4. Screw out the cutting tool (16).
5. Check the wearing plate (18).
6. Grease the square part of the new cutting tool and the bore
hole of the carrier slightly with "G1" lubricating grease (order
number 0139440).
7.
8. Align the cutting tool, observing the bevel grind while doing
so.
E543EN_06
Maintenance
19
