2.3
Symbols
Note
The following symbols are important for reading and understand-
ing the instruction manual. The correct interpretation of the sym-
bols will help you operate the machine better and safer.
Symbol
Name
Meaning
Read operating manual
Read the operator's manual and safety information in
their entirety before starting up the machine. Closely
follow the instructions given.
Safety class II
Indicates a doubly insulated tool.
Alternating current
Type or property of current
V
Volt
Voltage
A
Ampere
Current, current input
Hz
Hertz
Frequency (oscillations per second)
W
Watt
Power, power input
mm
Millimeters
Dimensions e.g.: material thickness, chamfer length
in
Inch
Dimensions e.g.: material thickness, chamfer length
n
o
Idle speed
Revolution speed without load
.../min
Revolutions/strokes per minute
Revolution speed, stroke rate per minute
Tab. 2
2.4
Noise and vibration information
Noise emission value may be exceeded.
Ø
Wear hearing protection.
Vibration emission value may be exceeded.
Ø
Select tools correctly and replace them promptly when they
show wear.
Ø
Maintenance may be carried out by trained specialist techni-
cians only.
Ø
Establish additional safety precautions for the protection of
the operator against the effects of vibrations (e.g. keeping
hands warm, organizing the work sequences, machining with
normal feed power).
Notes
■
The specified vibration emission value was measured in
accordance with a standardized testing procedure and can
be used to compare one electric tool with another.
E543EN_06
Symbols
7
WARNING
WARNING
