Crush injuries due to machine falling down/tipping over!
Ø
Supports must be placed beneath the machine when work-
ing with the machine in raised position.
The machine is tilting forwards!
Risk of fatal injury!
Ø
There must be no one in the danger zone during transport.
Ø
The machine may only be transported with the transport
securing devices mounted.
Ø
The machine may be operated only if it is anchored firmly
in the foundation.
1
Machine in raised position
2
Wooden beam
3
Adjustable leg
4
Set screw on the front of the
machine
Fig. 69527
4. Using the indoor crane or hydraulic jack, raise the machine
about 300 mm and place wooden beams beneath it to pre-
vent it from falling/tipping over.
Note
The machine is not anchored to the factory floor at the front!
The set screws ensure that the adjustment legs do not slip
out of place.
B1161en
Set-up and positioning - Version 1
2
‐
39
Positioning the machine
CAUTION
DANGER
